Jump to content

Leaderboard

The search index is currently processing. Leaderboard results may not be complete.

Popular Content

Showing content with the highest reputation since 06/25/2020 in all areas

  1. Is there any ETA when v5 will be available for general public?
    3 points
  2. Took a bit of time and looked through Product Board Roadmap - 2600Hz Community - If you want to add to the Roadmap, or put in your two cents. That's the place to do it! Best, esoare
    3 points
  3. The below works in AWS. I haven't worked much with Azure's networking environment, but I can't imagine (well, I can, it's Microsoft) that the DNAT / SNAT workings are too different. Assign PUB IP to instance/interface, then just change the below configs in Kamailio and Freeswitch. If you're using an all-in-one, then you'll just need one PUB. I've got a clustered setup going with my Kama and FS instances separate. On Freeswitch - Remember FS trunks directly out of the cluster. It does not route out back through Kamailio. nano /etc/kazoo/freeswitch/sip_profiles/sipinterface_1.x
    3 points
  4. Easy fix! As per the information from the Polycom forums, there are a variety of fields you can enable/disable: https://community.polycom.com/t5/VoIP-SIP-Phones/FAQ-How-can-I-create-a-local-directory-or-what-is-the/td-p/8216 The one I think you're referring to is sd (speed dial) which adds them to the home screen. You have to set a value for this (it can't just be 0 for disabled) so we just delete this tag from our XML files completely and then it goes away on the home screen.
    3 points
  5. No, it's not closed source. But we have paused on the public stuff to try and finish our app exchange. We are 10 years into this company and the entire point of the company was the app exchange, and it's still not done, so we're finishing that before we finalize and release 5.x
    3 points
  6. I can also confirm this, in Amazon EC2. But I only needed to change the Kamailio config. Correction; I also needed to add external/public ip to FreeSWITCH server at ext-rtp-ip, otherwise the sound didn't work. Br Tomas
    2 points
  7. Can confirm, applied these settings to a sandbox deployment without a bindable external IP and everything worked perfect.
    2 points
  8. You might find this link helpful. Although it's for AWS, the same config (at least mostly) would apply to Azure. https://github.com/OpenTelecom/kazoo-install-guide
    2 points
  9. Hi, Replying about how to restrict CLID, I think what you are looking for is the "ensure_valid_callerid" in system_config/callflow. By default it is set to false, just change it to true you can also check the complete document here: https://github.com/2600hz/kazoo/blob/master/applications/crossbar/priv/couchdb/schemas/system_config.callflow.json
    2 points
  10. Our SMS to Email gateway is code complete and in beta testing with a couple providers. We should be ready by next week for additional beta testers.
    2 points
  11. I managed to fix the callcenter app for ACDC in monster-ui v.4.3. You can get it at https://github.com/clara007/monster-ui-callcenter and test it too.
    2 points
  12. Does Kazoo support adding headers for STIR//Shaken Compliance?
    1 point
  13. you can enable double record route in kamailio, so kamailio will put both public and private ips, but actual communication will be on private ips between freeswitch and kamailio,
    1 point
  14. I may have overlooked this, but is there a way to modify the config of a yealink phone through advance provisioner? Example: I have several phones that I need to kill DND for. If I can get into them, I can dump the config, add the line needed, and upload back to the phone, but is there a way to do this using advanced provisioner for phones that are on a VLAN that I cannot access remotely? Thanks for any input
    1 point
  15. Sir, IF we are a carrier , with numbers from 2-3 vendors and need to use different outbound carrier , we have to add our signatures for calls to go through. All Switch providers have already made changes to add that signature.. This is reason , i am checking here
    1 point
  16. Hi all, Is there a guide / how to on setting up Kazoo in Azure? If not, does anyone want to help me create one for the community? If I'm building the environment in Azure, I might as well share the lessons learnt. I heard that as the public IP is not visible inside the VM, the out of the box config does not work? Any inputs are welcome. Cheers
    1 point
  17. ICYMI, the latest KAZOO release now includes our first iteration of the Contact List Import feature in Advanced Provisioner. NOTES: This release supports Poly VVX 400 Series devices only. Check our our documentation for it HERE. As always we'd love your feedback so we can continue to enhance the feature in future releases. Please add any update requests to our Product Board.
    1 point
  18. I was able to use streaming audio Music on Hold option via Advanced Callflows>Misc>Account's Music on Hold. Selected the Stream URL option and entered the link as shout://icstream01.thepleaseholdgroup.com:8000/phgteststream Just had to replace http:// with shout:// on the link. Tested successfully with calls on hold, parked calls and call transfers!
    1 point
  19. I will follow the suggestion and give it a try. Thanks.
    1 point
  20. Hello, I was wondering, would using a Kafka connect source to stream changes to account documents in Couchdb be likely to cause issues for Kazoo? I intend on try this soon with a basic install soon but was wondering if bypassing things like crossbar, amqp etc and monitoring changes in Couchdb directly in a readonly manner would be likely to cause issues? Looking to use, https://github.com/xebia/kafka-connect-couchdb but will only be sourcing data out of couchdb, not trying to sink into it. I think any updates to Kazoo should be made though the appropriate methods such as over cross
    1 point
  21. Hi all, Thanks for all the answers, much appreciated. It finally worked by referring to Meat's detailed information. Here is my configuration. On Freeswitch vi /etc/kazoo/freeswitch/sip_profiles/sipinterface_1.xml <param name="ext-rtp-ip" value="x.x.x.x"/> ##x.x.x.x is the external IP address you have assigned to this instance <param name="local-network-acl" value="NOPE"/> ##this is the setting I hadn't configured before, so the RTP routing had problems. systemctl restart kazoo-freeswitch On Kamailio vi /etc/kazoo/kamailio/loca
    1 point
  22. How do I set multiple phones to a single voicemail box? I want multiple phones to be able to access our single “support” voicemail. Can my same phone have more than 1 mailbox? YES! Here’s how: Open your Provisioner App. (This is slated for access in SmartPBX shortly) Select the Devices tab Select the device you want to update. Go to the Combo Keys tab From the dropdown for Type, select BLF In the Value field, enter *98[voice Mailbox number] as its value. There should be no spaces. Label
    1 point
  23. Not directly with a built in method, but you can build a call flow with a time of day to do it.
    1 point
  24. Thanks Karl again! Will test it
    1 point
  25. Oh wow! going to test it. Thank you so much.
    1 point
  26. For the T33G there is an issue around white noise generation where you can hear a sort of sine loop audio in the back ground. The newest firmware fixes most of this. It is actually a sort of sine loop audio that phases high and low. You can hear it when you pick up the handset and remove the dial tone in while the handset is still off the cradle.
    1 point
  27. That is a great question @RuhNet! Can some one chime in and let us know what issues there have been with v85…?
    1 point
  28. What are the types of issues that v85 firmware is causing?
    1 point
  29. Thank you Darren for sharing... Want access to this cool pop-up that shows you shortcuts in your Monster apps? Just press ? while in your screen and Voila! you will be graced with: I especially love the one where you can Show Fake Phone Numbers <Shift-S> Great for sharing screen shots with Support and/or among your customers!
    1 point
  30. We also need v85 support for for using the T5XW series Bluetooth with Yealink's new line of DECT headsets like the WH66. I have to manually upgrade phones to v85 to pair. Also, the latest T33G v85 firmware fixes some handset audio issues.
    1 point
  31. @G2G I did this today for a client.... They wanted a recording about a snow day to play, and then calls to continue as they normally do for business hours 899 will be where the main number for the business comes in. There is a Time 24x7 that is what it says, S-S 00:00-23:59 every day. The 900 Call Flow is the next Call flow with Time You have the Work Week M-F, 8am-5pm... These are the two Call flows that interest us. Setup this Call Flow with TTS: "Hello, I can help you open and close your office manually. For ins
    1 point
  32. 1 point
  33. I was looking to setup Speed dial for numbers like Dialing 11 --> predefined number , Dialing 12 ->> other pre defined PSTN number...
    1 point
  34. We have been trying to get this working as well. Unfortunatly this doesn't seem to work on a user level, it does on a device level tho. Any thoughts @mc_?
    1 point
  35. Download our .pdf 2600Hz Named Best Wholesale Cloud Communications Provider of the Year.pdf 2600Hz Named Best Wholesale Cloud Communications Provider of the Year NEWS PROVIDED BY 2600hz, Inc. Jul 31, 2020, 06:12 ET SAN FRANCISCO, July 31, 2020 /PRNewswire/ -- 2600Hz, a leading provider of unified business communications and the world-renowned KAZOO platform, has been named Best Wholesale Cloud Communications Provider of the Year by a panel of industry-leading analysts as part of the UC Today UC Awards 2020. During the awards ceremony, UC Today publishe
    1 point
  36. Are there any docs describing what this part of the Advanced Provisioner does?
    1 point
  37. Hi All. We have a customer requesting us, to have the call center start with user A, and only if user A is busy the call should start with the rest of the users. So in other words, the main receptionist should always have priority to receive the calls, and only if on call, should the calls route to user B. Is this possible ?
    1 point
  38. Hello, I like the new interface/app you created for this. It will make it easier to train and does not require advanced call flow access. Some feedback: It would be nice if we could specify or enable a feature code for people to automatically add the last received call to a default blacklist.
    1 point
  39. Hi all, I understand Kazoo allows a multi tier white label option for its partners and customers. Now for each reseller added to the platform, they'll have their own URL: https://portal.reseller1.com https://portal.reseller2.com How/where do we upload the certificates for each of those domains in a self service manner so that the reseller and setup their branding? I wasn't able to find this information. Thanks in advance for help. Cheers Shah
    1 point
  40. i would suggest to check first on each monthly database for the account in couchdb and verify the objects corresponding to each recording are pointing to the old storage plan or any sort of reference to the old s3 bucket. Then, the next step would be to jump into writing a python or any other language to connect to couchdb and change the value for each one of the files for each monthly database. there are some sample scripts in the community scripts repo.
    1 point
  41. You were right @Karl Stallknecht! I went ahead and edited the Macro in the Excel file (just commented out the stuff with sd) and the file it created had 0 mentions of 'sd', so you don't have to edit the xml file manually. Thanks for helping out and sharing your knowledge! esoare directory_generator-edited removed sd.xlsm
    1 point
  42. Ditto. We have installed quite a few of these.
    1 point
  43. Check out the kit on offer from Algo Solutions like their 8301. You can preload it with a wav file and have it broadcast the audio via multicast to any device on the network. https://www.algosolutions.com/product/8301-ip-paging-adapter-bell-scheduler/
    1 point
  44. It's probably an acceptable solution but consider the Grandstream HT801 is an analog adapter that requires the ATA and an analog phone.
    1 point
  45. yes, we had similar issue earlier, but once we updated to 4.3.58 , issue was gone, now it seems to have hit back.
    1 point
  46. I don't believe there are timers in Kazoo that can be used for this purpose. However, you can create your own and use https://docs.2600hz.com/supported/applications/crossbar/doc/channels/ to invoke a hangup after the expired time.
    1 point
  47. Well that's good to hear, but what about us that are doing active development in 5.0 and trying to get PRs pushed and stuff. What happens now?
    1 point
  48. Any open source community members have input into this question by @SIPGuy??? esoare
    1 point
×
×
  • Create New...