Jump to content
KAZOOcon: hackathon signup and details here! ×
  • 2600Hz-logo-RGB copy.png

    Welcome our Monster UI Apps Resource Pages!
    Below is a list of the applications developed by 2600Hz for KAZOO using the Monster UI Interface and documentation related to it. 
    If you have a question that is not covered here, check out our community forums.  

          Featured Apps

      New Updates!    Check it out!     

               SmartPBX_x512.png          

              CallCenter-PRO_x512.png          

              PortingManager_x512.png          

             commio_AppIcon-updated_round_x512.png          

             \DynamicCallerID.png            

             CallThruUs_x512.png          

    Smart PBX

    Call Center Pro

    Porting Manager   Comm.land   Dynamic Caller ID CallThru.us

     

    >>  2600Hzroundorangelogo.png  Return to Monster Apps Home Page  

     

  • PBX Connector STEP Guide


     

    2600HZ STEP GUIDE  PBX CONNECTOR

    What is the PBX Connector?

    PBX Connector attaches any PBX system to our SIP Trunks so that you can get rid of old and expensive analog or PRI lines. The App is extremely user-friendly, allowing you to move numbers from one PBX to another in minutes. Using the PBX’s own dial-plan tools, pick which phone you want to ring, which menu you would like the call to go to, and how you would like the phone number to act.

    1. Assign, Add or Port Numbers

      Use spare numbers that you purchased in SmartPBX and assign it in the PBX Connector. You can assign and configure numbers before or after you configure your PBX system. These numbers will be mapped back to the PBX. In real time, it will purchase or port a number and map back to the PBX.

      15_PBX1.png
    2. Configure your PBX System

      Simply select which PBX system you are using from the dropdown, and create a name. 2600Hz has preloaded the most popular PBX manufacturers for your ease-of-use. If you do not see your PBX manufacturer, choose Cisco and notify 2600Hz support.

      15_PBX2.png
    3. Authentication

      Create a username, password, enter the realm/domain and determine if your PBX is on a static IP address.

    15_PBX3.png

    Edited by Emily R (show revisions)




    User Feedback

    Recommended Comments

    There are no comments to display.


×
×
  • Create New...