avig2 Posted August 1, 2019 Report Share Posted August 1, 2019 Hi, is it possible to set up BLF in Advanced Provisioner to act as an intercom instead of ringing the ext. When I change the value to *0xxx the BLF stops working (ie. the light won't turn red when the other party is on the phone) ie. Type = BLF Account = Account 1 Value = *0102 (instead of just "102") Link to comment Share on other sites More sharing options...
Karl Stallknecht Posted August 2, 2019 Report Share Posted August 2, 2019 This would vary phone by phone. We tried to do it with Polycom and gave up, but there may be a way. What we did instead is add a soft key so the user can press the intercom button soft key and then the BLF key...the intercom button dials *0 (but doesn't start the call) and then the BLF key adds the extension to the end of it. Link to comment Share on other sites More sharing options...
avig2 Posted August 2, 2019 Author Report Share Posted August 2, 2019 Hmm... not the prettiest, but I’ll try. Thanks for the instructions! Link to comment Share on other sites More sharing options...
esoare Posted August 10, 2019 Report Share Posted August 10, 2019 on the Yealink, it would have to be a "Prefix" Value and "*0" Data/Value. esoare Link to comment Share on other sites More sharing options...
avig2 Posted August 13, 2019 Author Report Share Posted August 13, 2019 esorae, As usual you always come through with the answers:) Could I bother you to detail the exact steps how to set this up in Advanced Provisioner i.e where do I find the "prefix" value etc. Thanks, avig2 Link to comment Share on other sites More sharing options...
avig2 Posted August 14, 2019 Author Report Share Posted August 14, 2019 Hi, Can this be done in Advanced Provisioner or does it need to be done on the phone itself? Link to comment Share on other sites More sharing options...
esoare Posted August 14, 2019 Report Share Posted August 14, 2019 you have to do it on the phone @avig2 Link to comment Share on other sites More sharing options...
avig2 Posted August 14, 2019 Author Report Share Posted August 14, 2019 Is there a way to bulk provision settings on the phone themselves? Link to comment Share on other sites More sharing options...
esoare Posted August 16, 2019 Report Share Posted August 16, 2019 On 8/14/2019 at 1:24 PM, avig2 said: Is there a way to bulk provision settings on the phone themselves? Yes there is. I'll try to get a write up on that be end of next week. Don't have time for earlier. esoare Link to comment Share on other sites More sharing options...
avig2 Posted August 16, 2019 Author Report Share Posted August 16, 2019 2 minutes ago, esoare said: Yes there is. I'll try to get a write up on that be end of next week. Don't have time for earlier. esoare Anytime you get to it would be great, just offering your time to help is amazing! Link to comment Share on other sites More sharing options...
extremerotary Posted September 16, 2019 Report Share Posted September 16, 2019 @avig2 Polycoms - <attendant attendant.resourceList.{x}.address="{PRESENCE_ID}" (102) attendant.resourceList.{x}.callAddress="{*0+EXTENSION_NUMBER}" (*0102) attendant.resourceList.{x}.label="{TEXT_DISPLAY_ON_PHONE}" (John Smith) attendant.resourceList.{x}.type="automata" /> Link to comment Share on other sites More sharing options...
Recommended Posts