Logicwrath Posted June 6, 2017 Report Share Posted June 6, 2017 Hello,First, thanks for adding W56P to provisioner.So far I have seen 2-3 examples where a Yealink wireless device (W52P/W56P) is not getting the firmware updates automatically via Advanced Provisioner.In one case I manually updated to the same version I selected in AP and the update stuck. However, I suspect the firmware update feature may not be working correctly for those devices.I also noticed that Date & Time -> Daylight Savings -> Inherit (Automatic) setting is not getting applied. I had to manually configure it to get the time correct on a W56P. It kept the setting on reboot. I believe it was configured to do DST by Date even though Inherit was selected. Link to comment Share on other sites More sharing options...
Administrators Darren Schreiber Posted July 7, 2017 Administrators Report Share Posted July 7, 2017 Peter Lau and I have been discussing the new 81.x firmware, we are working hard to get that out and supported across the board. Link to comment Share on other sites More sharing options...
esoare Posted July 7, 2017 Report Share Posted July 7, 2017 (edited) When I noticed the W56P was in the New UI (What are we calling that again?) I programmed the MAC in Yealinks RPS, did a factory reset on the unit, and the phone went/stayed at Firmware Version 25.73.0.40.. Thanks for working on the firmware updates!! es Edited July 7, 2017 by esoare (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts