Panasonic KX-TGP600 syslog

[hIGH_aND_mIGHTY]

I've setup a syslog server and added relevant changes to a tgp600 config. Once provisioned I get data but not nearly as much as I would have expected.

Firmware version: 05.000
Relevant config settings

## Logging Settings
SYSLOG_ADDR="*our server url*"
SYSLOG_PORT="*the port we use*"

LOGGING_LEVEL_DNS="6"
LOGGING_LEVEL_NW1="6"
LOGGING_LEVEL_FILE="6"
LOGGING_LEVEL_SIP="6"
LOGGING_LEVEL_TR069="6"
LOGGING_LEVEL_STUN="6"
LOGGING_LEVEL_NW2="6"
LOGGING_LEVEL_CFGPARSE="6"
SYSLOG_OUT_START="Y"

-------------------------------------

I was expecting information on SIP calls and a ton more other messages. Instead I only get about 4 different types of messages and only one of them with any kind of regularity.

CFGRENEWDL: config:NUM_PLAN_PICKUP_GROUP[].
crond: crond: USER root pid 854 cmd broadcasttime -i 30 (This pops up once a minute)
shutdown: shutting down for system reboot
init: Switching to runlevel: 6

Does anyone have tgp600 syslog experience? With our grandstreams logging we get a ton of data to the same syslog server.

[SPC-Tim]

@hIGH_aND_mIGHTY

It appears that what you got from your SYSLOG pull is all that panasonic offers data wise:
https://www.manualslib.com/manual/920388/Panasonic-Kx-Tgp600.html?page=303#manual

This guide shows the fields you are displaying on your post.

[Mark Diaz]

On 11/14/2017 at 5:10 PM, hIGH_aND_mIGHTY said:

I've setup a syslog server and added relevant changes to a tgp600 config. Once provisioned I get data but not nearly as much as I would have expected.

Firmware version: 05.000
Relevant config settings

## Logging Settings
SYSLOG_ADDR="*our server url*"
SYSLOG_PORT="*the port we use*"

LOGGING_LEVEL_DNS="6"
LOGGING_LEVEL_NW1="6"
LOGGING_LEVEL_FILE="6"
LOGGING_LEVEL_SIP="6"
LOGGING_LEVEL_TR069="6"
LOGGING_LEVEL_STUN="6"
LOGGING_LEVEL_NW2="6"
LOGGING_LEVEL_CFGPARSE="6"
SYSLOG_OUT_START="Y"

-------------------------------------

I was expecting information on SIP calls and a ton more other messages. Instead I only get about 4 different types of messages and only one of them with any kind of regularity.

CFGRENEWDL: config:NUM_PLAN_PICKUP_GROUP[].
crond: crond: USER root pid 854 cmd broadcasttime -i 30 (This pops up once a minute)
shutdown: shutting down for system reboot
init: Switching to runlevel: 6

Does anyone have tgp600 syslog experience? With our grandstreams logging we get a ton of data to the same syslog server.

You're might want to consider sniffing packets on the network to the device also. This way you don't have to worry if the phone is lying to you