Shah Posted November 17, 2020 Report Share Posted November 17, 2020 Hi all, I have a configuration where I'm connecting multiple Sonus SBCs to via BPX Connector. The SBCs are able to register to Kazoo, but only the last registered SBCs shows active in PBX Connector. The desired result is to have multiple SBCs registered for backups and if a call comes in, for it to send the call to both the SBCs. Is this possible? or is it a product limitation? Any solution / workaround recommendation? Thanks Link to comment Share on other sites More sharing options...
fmateo05 Posted November 18, 2020 Report Share Posted November 18, 2020 I think you can set up IP based authentication, also you should use DNS service with SRV/NAPTR records for the SBC's IP addresses Link to comment Share on other sites More sharing options...
nick Posted November 18, 2020 Report Share Posted November 18, 2020 (edited) I do not think IP based authentication will work because you can not assign the same DID to more than one PBX instance. However DNS SRV might do the trick. Edited November 18, 2020 by nick (see edit history) Link to comment Share on other sites More sharing options...
2600Hz Employees mc_ Posted November 19, 2020 2600Hz Employees Report Share Posted November 19, 2020 @Shah are you creating one connector doc per PBX or one doc for all the PBXes? Link to comment Share on other sites More sharing options...
Shah Posted January 23, 2021 Author Report Share Posted January 23, 2021 Hi @mc_, sorry, missed this till now. I don't know what doc is. Basically I'm trying to create high availability for my downstream SBC off kazoo which I use pbx connector for. Tnx. Link to comment Share on other sites More sharing options...
Recommended Posts