Issue in Istallation

[mnoumanafzal875@gmail.com]

Hello I am deploying kazoo on CentOS 7 using the official guide. 

but i am stuck at the kamilio setup. the server dint start its always show service failed. 

[mnoumanafzal875@gmail.com]

[KNERD]

May want to do what the "Hint"  suggests.

[mnoumanafzal875@gmail.com]

sorry which hint ?

https://docs.2600hz.com/sysadmin/doc/install/install_via_centos7/
this is the guide and if you are talking about the hint in RabbitMQ to use older version then let me tell you that my rabbitMQ is working fine also i'm able to login to the GUI using Guest account 

[mc_]

You may want to expand the log lines returned by the status command there to see what exactly caused the main process to exit.

[mnoumanafzal875@gmail.com]

i did it by expanding it ..  nothing useful there too 3rd last line says enter in to the failed state. the fourth last show process exited and status =255.

its show nothing other than this 

Edited May 11, 2021 by mnoumanafzal875@gmail.com (see edit history)

[mc_]

Check the startup logs in /var/log/kamailio/kamailio.log and see if it suggests anything? Could be that vanilla Kamailio started and bound for the IP/port already. Try stopping kamailio (not kazoo-kamailio) if so.

[mnoumanafzal875@gmail.com]

it was the issue in local.cfg file .  these commands below were writing my host name and IP address at the required location but were unable to uncomment that configuration line in the file. i just uncomment  it and restarted the service now its running . 

thank you  very much for your help  

 

# Update the hostname in the config sed -i "s/kamailio\.2600hz\.com/${_HOSTNAME}/g" /etc/kazoo/kamailio/local.cfg

# Update the IP addresses sed -i "s/127\.0\.0\.1/${IP_ADDR}/g" /etc/kazoo/kamailio/local.cfg

[mnoumanafzal875@gmail.com]

now i'm at the way through to the last step having this issue  while initializing monster apps 

i ignored the above error and successfully logged in to the UI and i see these errors there  

also is there any manual where i can find how to setup kazoo for calling and all

[mc_]

Whitelabel 404 errors are expected and fine, you haven't configured any yet.

If you want to run some APIs youself: https://docs.2600hz.com/sysadmin/doc/install/configure_kazoo/

Otherwise use SmartPBX to create a device, then register your phone to your account and try a test call.

[mnoumanafzal875@gmail.com]

thank you very much for the help