Registration

[Avneet Singh 3]

Hello everyone,

How to register ip phones from only specific ip or register device using mac address

Thanks

Edited August 14, 2018 by Avneet Singh

[safarov 16]

On client equipment may be used any password.
This will not requested when used IP auth.

[mc_ 44]

You can setup a device to auth by IP address by setting the device's "sip.ip" and "sip.method" = "ip".

[safarov 16]

Thin is easiest way - update kamailio config to add ACL check on REGISTER logic.
I checked PCAP files. Yalink phones and other not send MAC during registration.
But you can check MAC at provisioning state.

[Avneet Singh 3]

On 8/14/2018 at 10:39 PM, mc_ said:

You can setup a device to auth by IP address by setting the device's "sip.ip" and "sip.method" = "ip".

what credentials to pass,I am using cisco SPA504G  Ip phone

Edited August 16, 2018 by Avneet Singh

[Avneet Singh 3]

On 8/14/2018 at 10:37 PM, safarov said:

Thin is easiest way - update kamailio config to add ACL check on REGISTER logic.
I checked PCAP files. Yalink phones and other not send MAC during registration.
But you can check MAC at provisioning state.

which config file to be changed ,and what changes are to be made in the file please explain

[Avneet Singh 3]

2 hours ago, safarov said:

On client equipment may be used any password.
This will not requested when used IP auth.

not working in my case , In Ui adding credentials like this

Realm -  sip.user.com

Authentication Method - Ip

IP Address - 192.168.1.131

Invite Format - E. 164