esoare
-
Posts
857 -
Joined
-
Days Won
37
Content Type
Profiles
Forums
Resource Library: Monster UI Apps for KAZOO
Events
Downloads
Posts posted by esoare
-
-
Having a problem with a new install of 5 phones.
T42S's.
I setup the phones with PCMU only in the Codec. But the Audio Codecs for Account 1 on the phone are setup as:
G722
PCMU
PMCA
G729
~~~~~~~~~~~~~~
I Specifically setup PCMU at the Phone Level.
Still didn't change the Codec for Account 1.
In the Phone I DISABLED " Use User Settings"
Still didn't change the Codec for Account 1.
I'll have to test out on a T42G back at the office to see if those are affected also.
NOTE: These were new phones, using the Yealink RPS...I made a change to the "Settings -> Preference->Backlight Time (seconds) to 'Always On'. + Change to "Directory -> Setting -> placed Remote Phone Book in the Enabled side on both screens" Also The unit is using Firmware 66.81.0.110
-
21 hours ago, Logicwrath said:
I just spoke with someone at one of our distributors who suggested that Yealink will be unlocking better versions of their OPUS codec sometime this fall in a firmware update. This is great news and I hope it ends up sounding much better.
Thanks for the followup!
es
-
21 hours ago, Chris Kerber said:
Keep in mind this is currently undergoing quite a bit of design work, so things are bound to change a bit more. We are looking at ways to allow it as a common access utility with the ability to swap locations similar to how resellers can swap accounts via the top level navigation bar. Our main goal currently is to have the Locations app itself serve as ways for you to set up a location along with some details associated with it, and then within other apps that are able to utilize a specific location, have those settings specific to whichever location you're currently "masquerading" as.
Understood!
That sounds great!
es
-
22 minutes ago, Darren Schreiber said:
Found the setting and changed it! You should now be able to edit.
Confirmed working!
es
-
It only appears for a certain amount of time...
Not sure what the time limit is.
-
On 8/17/2017 at 7:14 PM, Tuly said:
Thank you understood, Let me go a step further,
is it possible to transfer back a phone call ( was transferred to a cell) from cell phone to the office phone?
Let's say you get a forwarded call on your cell phone, and you would like to transfer it back to one secretary is possible to press something like *2101?
Not that I am aware of. Hopefully it would be available on 2600hz Mobile sometime soon. And even better, on any cell phone. But I am not sure if it is in the pipeline.
-
Code is 7989.
I guess that would/might affect this...
-
1 hour ago, Josh Sanders said:
Hey everyone! As Chris mentioned above, a new app—which will make handling multiple locations less cumbersome—is in the final stages of the design phase. As such, we wanted to share a few visuals from the design process.
It's important to note that these visuals may not reflect the final app with full accuracy. Some information, functionality, and/or layouts depicted in these screenshots may not (or will not) be making it to development, as final mockups are still going thru revisions. With that said, they do represent the general look and feel of the app, so we wanted to share a glimpse of what's coming!
Enjoy your first + Josh!
That is amazing!
p.s. suggest, this should be available somehow through Advance Call Flows also...+at the User/Device level in Advanced Call Flows.
-
On 8/11/2017 at 6:15 AM, Tuly said:
I may have asked ones but do not have an answer,
what is the Feature Code "move 6683" ?
It is for the following reason.
If as a User, I forward my VoIP phone to my cell phone, using *72 + 1503-xxx-xxxx.
1) I get an outside call (or another extension) that calls me.
2) The call gets forwarded to my cell and I am speaking with the caller
3) I can go to my desk phone.
4) Press 6683 + Send
5) The system will connect the caller to my VoIP phone and disconnect the call to my cell phone.
~~~~~~~~~~~~~~~~
It is to move calls to a user, between devices.
FYI: hope I'm not spoiling things for anyone
This works with 2600hz mobile also!
I can move a call 6683, between my Desk VoIP and my 2600hz Mobile device by pressing 6683 + Send on my cell phone. And vice versa.
If that answers your question, feel free to hit that "Green Plus" sign on this post.
esoare
-
23 minutes ago, mc_ said:
@esoare I gave a presentation at KazooCon 2016. Any programming language that can receive an HTTP request and respond appropriately will work.
haha. Missed 2016.
I Checked youtube for your video, but no 2016 videos got upload....i'm recollecting technical difficulties...
Thanks for the pointer there. Some of us are more at the script kiddie stage and need to be shown slowly. Like, if it doesn't work exactly, I can spend a day on something @mc_ can comprehend in 10 seconds what isn't correct and fix it under 10 minutes.
I am happy to report, that I did get a Open Source project running on my web-server. I am pretty stocked about that! It just took all day.
esoare
-
So I'm trying to get a Obihai 202 device setup through advanced provisioner for a conference room phone (traditional analog conf. phone).
I setup the Obiha in the Advanced Provisioner with the appropriate MAC address.
I'm trying to figure out how to setup the Obihai to point to the provisioner and grab it's info.
Of course, time crunch...
Can anyone point me in the right direction?
esoare
-
I would suggest Something with PIVOT!
Like a stem to stern including, what the heck do I need to do to, install a pivot server? what programming language, open ports, logic on the pivot server, etc...
If you want an interesting example/use case, PM me and I'll let you know what it is
Don't want to spoil the surprise if you pick it!
-
5 minutes ago, Karl Stallknecht said:
Potentially, I just don't know anything about Pivot :-(
Same here!
I'll post that as a suggestion for Kazoocon2017.
Like a stem to stern tutorial!
-
So I have the Video Codecs setup in the devices on the Production system. I also have the Zoiper Softphone setup with the proper codec.
I try a Video call, but it's a no go. I Don't have another YEalink T58V to test with yet, so I am not sure if that would work.
Is Video turned on in production? Does anyone have it running on their own clusters? Does it work well?
esoare
-
Above is how you do it. You could do it with a User, or a Device. Whichever suites your fancy.
esoare
-
Do you have access to Advanced Call Flows?
-
30 minutes ago, Tuly said:
why don't you change the media file? Let's say in all ring groups you have the music on hold selected "mainMOH" go to media and change the .WAV file only on one place
What @Tuly is referencing.
Advanced Call Flows.
Play Media
Select the Media that has the Music.
Edit.
Upload the new file into the media that is named in all the Ring Groups.
-
no. it's going backwards.
So, from what is visible in advanced provisioner. The Yealink T42S for example. There is only 2 options. "Current" (which by the way, Should the firmware version be placed beside "Current" so it's known which Version "Current" is?) and V81.0.110. While Yealink has had 4 total firmware's for the T42s on Yealink's website.
I am suggesting have all the variants available. i/e .25, .60, .70, as well as .110.... It may be to arduous to accomplish, but it would certainly tell us if something broke between firmware's. Perhaps going forward, as new firmware's become available, 2600hz plans on adding all of them to the Advanced Provisioner, and the, "going backwards" won't be of consequence?
I just looked at the Yealink T42G and there are 20-24 firmware variants. Obviously some are pretty old....I wouldn't want to pick between all those.
I guess it's a matter of policy, and how much Firmware variants to offer...
Sorry to bring complication to this. Perhaps I'm overthinking things....
-
I just had a mind blowing idea!
What if you could select any of the firmware's available for the phone? This would be helpful for us to "test" things out, more easily
For instance.
Right now the Yealink T42S has 4 firmwares on the Yealink website. Yealink T42s Downloads . What if for testing purposes, I want to have 4-6 phones that I can Beta Test stuff with. In advanced porvisioner, I can select the different firmwares, and see if there is a difference, say with "BLF", or the "Call Park" feature!!
For instance. In 81.0.70 firmware, Yealink did some Optimization to the "Call Park" function. Well. I am using 81.0.110 and noticed that the Red Light gets stuck on...but I don't have a way to
1: Go back to pre 81.0.70,
OR
2: Even better, have 4 phones with various firmware 81.0.110, 81.0.70, 81.0.60, 81.0.25
and because they respond differently, I know that Yealink screwed things up again on firmware 81.0.70 upwards, which killed Call Park/BLF on Production. (This isn't an official report, but I suspect that Call Park is messed up again, it seems to work with BLF and *32, but I got a Stuck "Red light Flashing" with Call Park and *32)
Why is Option 2 relevant. Because there wouldn't have to be any booting/rebooting as firmware's are installed. There would be a valid testing of a features, across multiple firmware's in real time!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Yealink firmware Optimization from the PDF "Yealink_SIP_Phones_Release_Note_Of_Version_V81.pdf "
"4. Optimized the feature of Call Park. Description: You can enable or disable the IP phone to dial out the call park code/park retrieve code directly when pressing the Park/Retrieve soft key. And you can press the BLF/BLF List key to park the call to the monitored user or retrieve the call parked from the monitored user."
-
Yealink T42S Firmware 81.0.110
Not sure if we should post bugs here or what we may think are bugs
If we aren't supposed to, then I can post through the normal channels.
So, in
~~~~~~~~~~~~~
Advanced Provisioner,
Select Config of a Device,
in "combo keys", if you select something like "Call Park" or "BLF" probably anything in "TYPE" and
leave Account as "Inherit"
Change the Value and
Label as appropriate.
It won't work. You have to select Account "Line 1" or whatever, the Inherit doesn't do it's job.
After provisioning,
Pressing the button says "Account is Invalid" (at least on yealink t42s)
The video below's code is 7989.
-
13 hours ago, Darren Schreiber said:
I agree with that completely. We'd LOVE to have the public feedback. Frankly we've also been struggling with how to get people to actually test. I know ya'all are busy, but honestly we can't think of everything to test and it drives the costs way up if 100% of the testing is on us. I am debating whether people get "bug hunter" credits that they can cash in as incentives or something for participating in the testing.
We've been pretty religious at this point about pushing ALL updates to sandbox WEEKS before pushing to production, and that includes provisioner. But we're only seeing two or three people actually use sandbox to pre-test regularly.
I wouldn't mind having my company "in" the sandbox... Maybe I would if it went down. Lol. But it sure would get me testing new stuff.
OR
I was playing around with existing phones between production and sandbox.
I basically would use Yealink RPS and Grandstream Gaps to change which provisioner to point to, sandbox or production, therefore it just required a "reset to manufacturers settings" the phone would reset and go to RPS or Gaps to get additional provisioner server settings.
(question, are the two provisioned totally separate? So I can leave the phones built with the same Mac addresses and it won't cause issues, is my question)
If the above answer is, it's OK, then I don't see a need to put my company in sandbox.
*****************************************
12 hours ago, Darren Schreiber said:That makes sense. What if we add a special newsletter you can sign up for that is solely for sandbox updates?
Please make the newsletter part of the forum also!! That way all the info is in one place. I already asked a programming/api question, which would have been tougher if the smart people where on the Google groups.
Being able to see what was released in the sandbox, would be easier to play with, if it was in the forum, versus in an email based newsletter, that we would have to hunt down.
There may be a need to lock that topic down since some features won't make it to production or be delayed. But I would suggest the more eyes that are on it the better. Perhaps some of the people running their own cluster want to test out the latest stuff also.
Hope that helps.
esoare
-
On 8/3/2017 at 6:35 PM, extremerotary said:
I think a good improvement upon the advanced provisioner would be to have a section where a user can put additional "custom code". These would be parameters otherwise unset by the template used in the provisioner. We have this in our provisioner and our customers love it. It allows them to customize or otherwise improve the default template and tailor it to their customers' needs.
That would be something for the app exchange when it becomes available?
Perhaps there might be more options 2600hz may add (cough, cough, templates!) , but they probably don't want to support every feature in every phone. Maybe a monster app to create custom configs (templates would be nice) , and server to store them = monthly recurring income for someone...
-
35 minutes ago, Rod Montgomery said:
We've got a prospect tired of the hassle of copying their call recordings from Twilio to their storage and then having to erase the recordings from Twilio. We showed him how 2600Hz Kazoo recordings and Google drive and AWS storage integration works in our Sandbox account (oops). He loved it! However, we forgot to tell him those apps aren't available in production yet. When will the app be ready for production? I hope by the time we'd be able to activate his service?
Well. Tell them it's in Beta and unavailable.
lol.
-
Definitely Excited over here!! That is totally awesome!!
esoare
Inherit of Codec not working on T42S - Not even Selecting Specific
in Provisioner Service
Posted
I Tried downgrading the firmware to 66.81.0.90 but that didn't help.